Materials Innovation Platform | © Scienta Omicron
Illustration of an example Materials Innovation Platform System  | © Scienta Omicron
MIP concept with thin three EVO-50 MBE modules on the left and analysis tools (ARPES, XPS and SPM) on the right side of the sample transfer backbone consisting of two Radial Distribution Chambers (RDCs)
Concept of a Materials Innovation Platform, consisting of an EVO-50 MBE growth module combined with the surface analysis instruments ARPES Lab, XPS Lab, and a low temperature SPM, connected by an expandable linear transfer line (LTL)

Materials Innovation Platform (MIP)

Accelerating the Pace of Discovery

PVDMBELaser MBEALDSputter DepositionDC Sputter DepositionRF Sputter DepositionEBPVDCVDPE CVD

  • Multiple deposition modules and/or different deposition technologies
  • Surface analysis between process steps for the chemical, electronical and structural investigations
  • Ultra-clean UHV environment at any time during the transfer between modules
  • Leading scientific components for forefront research
  • Largest installed base of integrated deposition and analysis tool
  • Extendability for additional deposition or analysis techniques

Materials Innovation Platforms (MIPs) integrate instrumentation for growth with sophisticated in-situ characterisation tools. Samples can thus be analysed at intermediate process steps to understand cause-effect correlations of a novel material’s growth and structure without leaving the clean UHV environment at any time. Scienta Omicron’s broad portfolio enables us to act as a single source supplier and a reliable partner for the design, production and in-field support, ensuring a smooth delivery process and a high system uptime.

Novel materials with unique properties are key enablers for new, disruptive technologies. Of special interest are nanomaterials, which can be engineered for specific physical, electrical, and chemical properties by exploitation of quantum size effects. Understanding cause-effect correlations of these materials' growth and structure supports the systematic discovery and optimisation of the desired properties. A proven and effective approach for this research is to use a 'Materials Innovation Platform'.

Materials Innovation Platforms (MIP) integrate instrumentation for growth and detailed characterisation of samples in-situ. Not only is sample quality preserved by maintaining UHV conditions, but analysis and growth can be done at intermediate process steps and performed far more rapidly than if the instrumentation was separated. Further, appropriate design of a MIP provides for expansion and exchange of capabilities as the research evolves. Working with a single supplier and partner to design, produce and support these MIPs ensures highest instrument uptime, ease-of-use, and productivity.

 Enabling Forefront Research

Modern application fields need both, a fundamental understanding of the underlying physics and chemistry, as well as an integrated approach towards device implementation. A Materials Innovation Platform is the key to success whenever one of these topics is required:

  • Multiple deposition modules and/or different deposition technologies
  • Ultra-clean UHV environment during transfer between modules at any time
  • Surface analysis between process steps for the chemical, electronical and structural investigation of surfaces and interfaces
  • Extendability for additional deposition or analysis techniques

More Information

MIP Core Competencies

Our core competencies enable your success in challenging multi-module projects.
Competence

  • Tailoring solutions to the scientific needs with more than 1000 UHV systems delivered
  • Single source supplier and full project responsibility
  • Global sales & service organisation

Application Know-How

  • Technology leader in UHV surface analysis & MBE
  • More than 30 supported technologies
  • Experience in identifying suitable analysis techniques

Modular, Configurable & Extendable

  • Installed base: > 20 complex MIPs, rapidly growing
  • Quality & reliability ensures highest up-time
  • Configurable modules for easy integration

Technical building blocks

  • High quality UHV solutions
  • Linear transfer (LTL)
  • Radial distribution (RDC)
  • Mistral system control
  • Special purpose modules

Surface Analysis Techniques

Scienta Omicron offers the broadest range of UHV surface chemical and structural analysis techniques, fully integrated and interfaced by a single supplier. Virtually any of our turn-key analysis systems is suitable for use within a Materials Innovation Platform. Third Party systems such as Atomic Layer Deposition (ALD), Focused Ion Beam Lithography (FIB) and many more can be interfaced using dedicated buffer and sample handling systems.

  • Angle Resolved Photoemission Spectroscopy (ARPES Lab)
  • X-Ray Photoemission Spectroscopy (XPS Lab)
  • Hard X-Ray Photoemission Spectroscopy (HAXPES Lab)
  • Momentum Microscopy (NanoESCA)
  • Scanning Auger Microscopy (SAM)
  • Scanning Electron Microscopy (UHV-SEM)
  • Scanning Probe Microscopy (SPM), at variable and low temperatures, and in high magnetic fields
  • Atomically precise electrical probing (LT Nanoprobe)

Thin Film Deposition Techniques

Proven research MBE systems - easy to use, flexible, expandable, and covering the full range of MBE-based technologies from small sample plates up to 4" wafers.

  • Si/Ge, III-V, II-VI
  • Oxide, Nitride
  • Organic MBE
  • Transition metal dichalcogenides (TMDs)
  • Topological insulators
  • Laser MBE

Interface technologies for Atomic Layer Deposition (ALD), Pulsed Laser Deposition (PLD), Sputtering and more...

Reference systems

Materials Innovation Platform (MIP) with Five Deposition Modules and XPS, UPS, AES, ISS, SPM | © Scienta Omicron
121547

Materials Innovation Platform (MIP) for Novel Quantum Materials

Materials Innovation Platform (MIP) to enable research on the combination of different material classes for the development of novel quantum materials.

more
Nanofabrication & Epitaxy Cluster | © Scienta Omicron
121403

Nanofabrication & Epitaxy Cluster

The Nanofabrication and Epitaxy Cluster is a multi-user platform of the Helmholtz Foundation for research on structures and devices for quantum computing, semiconductor technology and materials, and concepts for novel devices. Extended in 2020 by a NanoScanLab (FIB/SEM), Large Sample SPM for 4" wafers, and LEED module.

more
Epitaxy Laboratory  | © Scienta Omicron
121426

Epitaxy Laboratory

Materials Innovation Platform (MIP) with research focus on fabrication of epitaxially grown III-N semiconductors for optoelectronics and spintronics using a state-of-the-art cleanroom lab.

more
Materials Innovation Platform (MIP) with MBE and Surface Analysis
74504

Materials Innovation Platform (MIP) with MBE and Surface Analysis

Institute for Integrative Nanosciences (IIN) research activities cover flexible and printable magneto-electronic devices, self-propelled nanotools, strain-tunable single photon devices, ultra-compact self-wound batteries, as well as binary GaAs, AlAs, InAs layers, ternary InGaAs & AlGaAs compounds and self-assembled InAs and GaAs quantum dots.

more
Materials Innovation Platform with EVO50 MBE, ARPES and LT Nanoprobe at the 2D Crystal Consortium (2DCC-MIP) | © Penn State University
150713

Materials Innovation Platform (MIP) with EVO-50 MBE, ARPES and LT Nanoprobe

The 2DCC-MIP is focused on advancing the synthesis of 2D materials within the context of a national user facility. The 2DCC is developing custom deposition tools with in-situ and real time characterisation and facilities for bulk growth of chalcogenide single crystals. Unique capabilities are also available to simulate growth kinetics through first principles and a reactive potential approach.

more
Scienta Omicron's Linear Transfer Line at the School of Materials Science & Engineering, Tsinghua University | © Scienta Omicron
163307

Materials Innovation Platform (MIP) with MBE, NanoScan Lab, VT AFM and ARPES Lab

Research focuses on Magnetic Films and Spintronics, including antiferromagnet spintronics and multi-field control of magnetism.

more
Molecular Beam Epitaxy (MBE), Atomic Layer Deposition (ALD), and in-situ X-Ray Photoelectron Spectroscopy Laboratory | © Scienta Omicron
163504

Materials Innovation Platform (MIP) with MBE, ALD, and XPS

The group’s multidisciplinary research focuses on the growth, characterisation, and device physics of quantum and semiconductor materials for novel devices and applications. Their approach utilises advanced molecular beam epitaxy techniques, selective area atomic layer deposition, and highly developed materials characterisation to fundamentally understand the nucleation and growth process, material nanostructure, chemical bonding, and experimentally determined band structure. They then correlate those findings with advanced electrical transport and magnetic measurements from devices that they fabricate to take full advantage of the novel properties of the materials and heterostructures that are created. Their current research interests include semiconductor defects for quantum communication, topologically protected transport in semiconductors and metals, magnetic properties in 2D materials, and back-end-of-line materials and device integration.

more
Epitaxial Quantum Materials | © Scienta Omicron
165105

Materials Innovation Platform (MIP) for Epitaxial Quantum Materials

Research focus on controlled synthesis of epitaxial thin films and nanostructures, including: ferroelectrics, strongly correlated oxides, multiferroics, superconductors, thermoelectrics, photovoltaics, oxide catalysts, electronic/ionic conductors, and the characterisation of their functional properties.

more
The Quantum Solid State Physics Research System for the NTT Group, Japan | © Scienta Omicron
173505

Materials Innovation Platform (MIP) with 3 MBE Modules

Research focus on the topologically protected quantum effects in solid states, electron correlations and quantum coherence in semiconductor nanostructures, many-body effects in quantum Hall systems, interplay between disorder and interaction as well as the design, growth and fabrication of two-dimensional electron systems with controlled physical properties.

more
Molecular Beam Epitaxy (MBE) System and Angle-Resolved Photoemission Spectroscopy (ARPES) Cluster Tool for the Nanyang Technological University  | © Scienta Omicron
174702

Cluster Tool for MBE and ARPES

Materials Innovation Platform (MIP) with ARPES and MBE modules for the growth and characterisation of topological insulator chalcogenide crystals.

more
The VT SPM Lab, Lab 10 MBE,  MIP, and VT Systems at School of Physical Science and Technology, Shanghai Tech University | © Scienta Omicron
182905

Compact Materials Innovation Platform (MIP) with Lab10 MBE and VT SPM Lab

Materials Innovation Platform (MIP) to investigate novel materials such as monolayer transition metal dichalcogenides (TMDC).

more
LT STM, MIP and MBE at Wuhan University | © Scienta Omicron
182908

Materials Innovation Platform (MIP) with LT STM and MBE

more
UHV Cluster System at the D&S Research Center, Samsung Electronics Co.,Ltd. | © Scienta Omicron
183917

Surface Science Analysis Cluster System

Cluster system offering multiple complementary surface science techniques, as XPS, UPS and AFM for detailed sample characterisation. The analysis system is integrated into a linear transfer line to ensure future expandability.

more